Welcome to Vizible Technologies ... home of Plug & Ride^TM products

We are a quality Motorcycle/ATV/Car/Truck Brake Light enhancing devices company with locations in United States, Canada.

• Please feel free to browse and let us know if you require assistance or have any questions.
• We are in the process of working with local vendors to carry our products.
• Don't see your motorcycle on our Product List? No problem. Please drop us an email and we will work with you to have a custom modulator with the correct OEM style connector built at no extra cost to you.

FEATURED PRODUCTS

It's a proven fact that motorcycles can decelerate more rapidly than most cars and trucks. The combination of a motorcycle's narrow profile and the brisk change in velocity during braking is the most common cause of rear end accidents involving motorcycles, and often the results are fatal to the rider. Vizible Technologies' SupaBrake Flasher is designed to enhance the reaction time of the driver of the vehicle behind when a motorcycle they are following begins to decelerate.

This patent pending product is a solid state device that actively modulates the rear brake light of a vehicle. It is designed to pulsate the vehicle's rear brake light with a variable number of flashes calculated by its embedded algorithm. The algorithm is based on the rate at which the rider/driver applies the brakes. As a result, the brake light(s) are flashed in a more subtle manner at lower speeds, and more aggressively at higher speeds. Whereas other, simpler products on the market continuously "blink" the brake light(s) with an annoying flashing routine each and every time the brakes are applied, the Supabrake flasher only blinks in driving conditions when you need to get the immediate attention of drivers behind you.

• View the SupraBrake Flasher installation video here.
• View the SupraBrake Flasher demo video here.
• View the SupraBrake Flasher data sheet here.
• View the SupraBrake Flasher algorithm chart here.
• Select and purchase your SupraBrake Flasher here.
  

FUNCTION

Upon applying the brakes, the module sends a burst of pulses to the vehicle's brake light(s). The duration of the burst is a function of the time elapsed between the current brake cycle and the previous one. After this initial burst, the unit allows the rear brake light to function normally (solid brake light). This algorithm is designed to eliminate target fixation as found in cheaper, passive versions that continuously "blink" the brake light(s) even though the vehicle is at a complete stop.

• Example at low speed
  When the frequency at which the driver/rider applies the brakes increases, (i.e. during low speeds such as city driving), the shorter the burst of flashes to the rear brake(s) light will be. If the brakes are applied within 0 - 12 seconds, the brake light will NOT flash - thus allowing it to function normally (solid brake light). This condition is most valuable during heavy stop-and-go traffic so as not to annoy the person or police in the vehicle behind you.
• Example at cruising speed
  When the frequency at which the driver/rider applies the brakes decreases, (i.e. at cruising speed), the longer the burst to the rear brake light will be. This condition is most valuable during quick sudden decelerations at speeds which require quick reaction to changes in traffic conditions or other driver's intentions. It has been scientifically proven that a quick flashing of a vehicle's brakes will alert the driver behind much sooner ... and the SupaBrake Flasher does this for you.
  
  

FEATURES & BENEFITS

• Input de-bounce
  This feature allows the user to quickly “tap” the brake lever or pedal without the algorithm inducing its flash routine or resetting. In an event of a "tap", the brake light will function normally and will appear as an ordinary tap of the brakes. Another aspect to this feature is that it allows the user to initiate a quick speed check on the rear brakes before a full application of the front brakes. In this case the algorithm will trigger a burst after full brake application.
• Force-Flash retriggering
  This technology, unique to Vizible Technologies, allows the rider to manually induce a flash routine after the initial application of the brakes. This is useful when stopped alone at a red light or in traffic to alert vehicles approaching from behind. Example: Press and hold the brakes for >3seconds. Quickly release and reapply the brakes within half second. The unit will output a burst of flashes.
• Decaying flash routine
  Each pulse period is gradually increased from the previous pulse. This gives the given burst cycle a "de-acceleration" illusion when viewed from behind at speed. In other words, the routine will start with a faster frequency and end with a slower frequency.
• Simple Plug & Ride Installation
  
• Miniature size
  
• Works with all OEM light devices (incandescent, LED or halogen)
  
• Algorithm with custom flash routine programming available
  
• FREE shipping and handling worldwide
  
• Ships within 24hrs
  
• 2 year limited warranty
  
• High temperature tolerance
  
• Vibration and shock tested
  
• All weather proof (IEC 529 IP 6.7 standards)
  
• Surface mount electronics
  
• Powerful micro-controller with "watch-dog" technology
  
• MOSFET driven
  
• Opto-Isolated from vehicle's electrical systems
  
• High load current
  
• Low supply(Quiescent) current
• OEM connectors
• De-bounce feature
  Ability to tap brakes without resetting the algorithm
• Variable number of flashing output based on a 100% programmable algorithm
• Grace period between brake applications
  The flasher won't activate if brakes are applied again within a certain period of time
• Force-Flash retrigger
  Ability to induce a burst of flashes while stopped at a stop light if another vehicle approaches from behind
• Decaying flash routine
• Our Plug & Ride products are designed to make installation fun and simple
  

Don't put other outdated bulkier modules on your vehicle that pulsate your brake light each and every time you apply your brakes. Most of these cheaper engineered modules will continue to flash your brake light(s) with the same irritating routine even when you are completely stopped in traffic. This is not only illegal and annoying it detracts from the visual appearance of your vehicle.

We have been hearing from many Ducati Monster owners about building a better quality rear LED replacement for our beloved Monster. We have listened and answered back with the SupaNova!

The SupaNova offers the highest LED density than other similar products. With a footprint of 60+ SMD LEDs per square inch and superior electronics, it is by far the most advanced and efficient LED product for the Ducati Monster. As a result, it operates over 12 times cooler and outputs several times more light then a standard 1157 type bulb. Boosting 490 individual wide-angle LEDs, the SupaNova eliminates the classic directional and cheesy "corn-row" issues as seen with other low count LED board products.

LEDs are current devices. Not voltage. Thus they should be treated as such. We designed the proper circuit utilizing a true modulating current source to drive our LEDs to their fullest potential while staying well within their electrical specs. This allows each LED to disperse the highest photon count possible while maintaining a higher life span and low MTBF. That is why we offer a limited 2 years warrant on the SupaNova.

The product is available in two basic configurations. The SN350 featuring 350 ultra wide dispersion red LEDs and a fully-integrated version, the SN490i, which incorporates an additional 140 amber yellow LEDs for turn signal function.

• View the SupraNova installation PDF here.
• View the SupraNova data sheet here.
• View the SupraNova power up video here.
• Select and purchase your SupraNova here.
  
  

FEATURES & BENEFITS

• Professionally engineered
• Simple Plug-&-Ride installation cleans up excess wires after install
• 350(red) + 140(Amber) Ultra bright AlInGaP chip LEDs
• 100% Surface-Mount-Technology maximizes LED footprint density
• Density: 60+ individual LEDs per square inch!
• 53700mcd potential output
• Ultra-wide spatial distribution light pattern (135deg +/- 10deg)
• Integrated turn signals
• Integrated load resistors to mimic the stock 10W turn indicator bulbs thus stock flash rate
• Integrated down facing white LEDs for license plate illumination
• Rubber mount isolation from vibration and shock tested
• Integrated SupaBrake modulator
• Wide selection of colored lens. (Clear, Smoked, Red and lightly tinted Blue or Yellow)
• Opto-Isolated from vehicle's electrical systems
• Powered by a true current source
• PWM driven maximizes luminous intensity
• Powerful micro-controller
• Software with "watch-dog"
  
• 2 year limited warranty

Don't put other outdated modules on your Ducati. They tend to be of poorer quality and design. Their narrower LED output makes their field-of-view extremely directional, confining light when viewed at the slightest angle. And their lower LED density will detract from the visual appearance of your Ducati Monster!

Learn more about additional Vizible Technologies Plug & Ride products here.