The customer gets a spare plug&play pigtail harness with their SupaBrake or GDO(Garage Door Opener) kit that allows access to the internal signals of the SBx module. If your bike has a 3 wire system, the switched 12V, modulated brake output and ground will be made available. >Stock brake signal also available upon request only!< This item is not available on certain motorcycles using a 2 wire PWM protocols.
The extra harness will be terminated with a 3 or 4 positions Amp Superseal 1.5 Series waterproof OEM grade connector or similar quality OEM connector. Length shall be no less than 6 inches. Wires shall be 18 or 20 AWG. Consult your service manual for allowable spare current on the tail light circuit/wire/connector. Not recommended for heavy loads such as grip/seat warmers.
Note that some of the newer bikes (especially) the BMW limit the amount of available current to drive extra loads. This is due to their real time monitor over the CANBus. For this you’ll need an extra driver. We offer a solution for this. Please contact us for more details.
David B. (verified owner) –
Toby L. –
Just what I needed to get an ignition trigger and a feed for a LED brake light light-bar. What a great option!
Tim (store manager) –
By using this along with Bernard’s knowledge I was able to leave my factory wiring in tact and still utilize the features of the Supabrake 2 with my stock tail light and the additional lighting installed in my top box with a quick disconnect when the box is not in use.
John T (store manager) –
Allowed me to have power for my phone. Very good.