SupaBrake-3 UNIVERSAL FITMENT

$85.00
(2 reviews) Write a Review
Availability:
1 - 4 biz dayz. Need it soon? Leave us note at checkout.
Shipping:
Calculated at Checkout
PDF Download:
SB3 User Guide
Installation:
Universal Kit Installation
Warranty:
10 Years!
The new SB3 is encapsulated in epoxy for the ultimate protection against grease, dirt and water. CNC'd out of Delrin (R) material case makes it virtually indestructible. Super miniature design packs a whole lot of functions! Big punch in a tiny package. Now comes with 108 thousands profiles! More then enough to meet any ones needs. The ultimate in motorcycle brake light modulator. Slap it in and go!

The Supsbarke-3 kit. Comes with ~7" of wires. 18 AWG. No OEM connectors but rather 6 each posi-locks! See other postings for motorcycle specific kits.

It's a proven fact that motorcycles can decelerate more rapidly than most cars and trucks. The combination of a motorcycle's narrow profile and the brisk change in velocity during braking is the most common cause of rear end accidents involving motorcycles, and often the results are fatal to the rider. Vizible Technologies' SupaBrake modulators are designed to enhance the reaction time of the vehicle behind you. It is designed to pulsate your vehicle's brake light(s) with a variable number of flashes calculated by its embedded algorithm. The algorithm is based on the rate at which you apply your brakes. As a result, the brake light(s) are flashed in a more subtle manner at lower speeds(when brakes are frequently used), and more aggressively at higher speeds(when brakes are not used for longer time intervals). Whereas other simpler products on the market that continuously "blink" their brake light(s) with an annoying repeating sequence - each and every time their brakes are applied! Our Supabrake product pulses in driving conditions when you need to get the immediate attention of drivers without annoying them.

Upon applying the brakes, the SupaBrake sends a burst of pulses to your motorcycle's brake light(s). The duration of the burst is a function of the time elapsed between the current brake cycle and the previous. After the burst, the unit allows the rear brake light to function normally(solid brake light). This algorithm is designed to eliminate target fixation as found in cheaper, passive versions that continuously "blink" the brake light(s) even though the vehicle is at a complete stop.

Example at low speed
When the frequency at which the driver/rider applies the brakes increases, (i.e. during low speeds such as city driving), the shorter the burst of flashes to the rear brake(s) light will be. If the brakes are applied within 0 - 12 seconds, the brake light will NOT flash - thus allowing it to function normally (solid brake light). This condition is most valuable during heavy stop-and-go traffic so as not to annoy the person or police in the vehicle behind you.

Example at cruising speed
When the frequency at which the driver/rider applies the brakes decreases, (i.e. at cruising speed), the longer the burst to the rear brake light will be. This condition is most valuable during quick sudden decelerations at speeds which require quick reaction to changes in traffic conditions or other driver's intentions. It has been scientifically proven that a quick flashing of a vehicle's brakes will alert the driver behind much sooner ... and the SupaBrake Flasher does this for you.

FEATURES & BENEFITS

  • User profile select
    108,801 field selectable/programmable profiles!
  • Self-contained profile selection. No need for external hardware/software etc.
  • On-The-Fly profile review. Allows rider to see what the internal settings of the algorithm is
  • Selectable Grace period between brake applications
    The flasher won't activate if brakes are applied again within a certain period of time
  • Input de-bounce
    This feature allows the user to quickly “tap” the brake lever or pedal without the algorithm inducing its flash routine or resetting. In an event of a "tap", the brake light will function normally and will appear as an ordinary tap of the brakes. Another aspect to this feature is that it allows the user to initiate a quick speed check on the rear brakes before a full application of the front brakes. In this case the algorithm will trigger a burst after full brake application.
  • Force-Flash retriggering
    This technology, unique to Vizible Technologies, allows the rider to manually induce a flash routine after the initial application of the brakes. This is useful when stopped alone at a red light or in traffic to alert vehicles approaching from behind. Example: Press and hold the brakes for >3seconds. Quickly release and reapply the brakes within half second. The unit will output a burst of flashes.
  • Decaying flash routine
    Each pulse period is gradually increased from the previous pulse. This gives the given burst cycle a "de-acceleration" illusion when viewed from behind at speed. In other words, the routine will start with a faster frequency and end with a slower frequency.
  • Defeat Mode
    This feature allows the rider to quickly bypass all the functions of the SupaBrake without having to physically remove the unit from the motorcycle. If need be, the functionality of your brake light can easily revert to stock condition.
  • Simple Plug & Ride Installation
  • Bypass Mode allows the user to bypass all the features of the SupaBrake without having to phyically remove the unit from the motorcycle..
  • Simple Plug & Ride Installation
  • Miniature size
  • Works with all OEM light devices (incandescent, LED or halogen)
  • Algorithm with custom flash routine programming available
  • Ships within 12-48hrs
  • 10 year limited warranty
  • Legal in all 50 States. (The running light never modulates. Only the brake light)
  • High temperature tolerance
  • Vibration and shock tested
  • All weather proof (IEC 529 IP 6.7 standards)
  • Surface mount electronics
  • Powerful micro-controller with "watch-dog" technology
  • MOSFET driven
  • Opto-Isolated from vehicle's electrical systems
  • High load current
  • Low supply(Quiescent) current
  • OEM connectors
  • De-bounce feature
    Ability to tap brakes without resetting the algorithm
  • Variable number of flashing output based on a 100% programmable algorithm
  • Force-Flash retrigger
    Ability to induce a burst of flashes while stopped at a stop light if another vehicle approaches from behind
  • Decaying flash routine

Don't put other outdated bulkier modules on your motorcycle that pulsate your brake light each and every time you apply your brakes. Most of these cheaper annoying modules will continue to flash your brake light(s) with the same irritating routine even when you are completely stopped in traffic. This is not only illegal and annoying it detracts from the visual appearance of your vehicle and other drivers/riders attention to the road. Some of these "zombie-like" flashers claim to have an accelerometer module that will supposedly give you a couple of hundreds milliseconds reaction time. We have experimented with these in our lab and road tests, they don’t work due to the nature of engine vibration, road vibration and mounting angle. Simply too many noise vectored components giving them very poor sensitivity. That is not the best way to implement this sort of technology. At best they are just for marketing. Be careful you always get what you pay for.

*Above product depiction is for show only. Actual connectors on unit ordered may differ.

2 Reviews Hide Reviews Show Reviews

  • 5
    SupaBrake III

    Posted by Gil C on 17th Jul 2018

    Super easy install. Lots of attributes to play with to get it to work just the way you want. Set-up instructions were a little complicated but once you got into it, it was pretty easy to adjust. Great Product.

  • 4
    Customer Support

    Posted by Marc Lamarche on 28th Dec 2016

    While i rated a 4 star is because I haven't had any feedback from riders behind me yet. My ST1300 is now fitted with the universal Supabrake 3 and had to be wired in unlike a plug and play. I was surprised on how small the unit is. The most impressive part is the customer support, I contacted Vizitec via email and within a few hours had a response. I read the instruction on the user guide and it's well written with a full explanation on how it works and can be calibrated to fir your needs, but it also comes with a default setting. I can see this being an added safety for your motorcycling experience.