Loading... Please wait...
  • Unlike other exhaust eliminators on the market. The TRI.EE is controlled by a micro-processor to guarantee a constant servo position regardless of voltage fluctuation.
  • CNC'd case. Plus epoxy makes this the best quality servo eliminator you can get for your Triumph. 100% water/grease/dirt proof.
  • Yeah... it's that small!

TRIUMPH Exhaust Servo Eliminator | TRI.EE

$50.00
Availability:
Ships today or tomorrow for sure!
Shipping:
Calculated at checkout

Product Description

TRIUMPH exhaust valve servo eliminator aka "TRI.EE" is a digital solid-state electronic device that is designed and manufactured 100% right here in the US of A by vizi-tec! This product comes with a factory warranty of 10 years! This device allows for the replacement of the servo actuator assembly as factory installed on some Triumph motorcycles as part of the exhaust system integrated with the ECU (Electronic Control Unit). The unit allows you to get rid of the servo setup thus giving your bike a cleaner look, leaving more room under the seat, save weight, improve performance, improve sound and remove the servo cables to the exhaust butterfly valve that has been known to fail or problematic. A lot cheaper than a have it serviced by the dealer or constant replacement of the mechanical motor assembly!

(ie: No CEL error messages). Device is for off-highway use.

Simple installation
1. Unplug and remove the factory exhaust valve actuator.
2. Remove cable(s) to the actual valve installed within the exhaust. The valve will default to the open position.
3. Use the provided tie wraps or optional double-sided tape/velco to secure the YAM.EE.
4. Plug the TRI.EE into the factory wiring harness using the stock connector.
5. Turn on your ignition and verify your Check Engine Light (CEL/FI/error) message is off. Done!

Unlike the other less robust plastic and analog products out there. The TRI.EE is controlled by a micro-processor that guarantees a constant servo position regardless of voltage fluctuation. The physical device is machined CNC from a single block and epoxied using automotive/marine grade products which makes this the best quality servo eliminator you can get for your Kawasaki. 100% water/grease/dirt proof. And because of this we offer a 10 year warranty!

Unit body: H = 8mm (0.315 inches) L = 24mm (0.945 inches) W = 35mm (1.378 inches) Mass = 20 grams (0.7 ounces)

We try to be very competitive and do regulate our prices to reflect the market. And or pass the savings in terms of our production cost. If you see that our prices have dropped after your purchase, within 30 days we’ll match it.

USER MANUAL AND INSTALLATION

  • INSTALLATION A - (pdf)
  • INSTALLATION B - (jpg)
  • DISCARDED HARDWARE - (jpg)

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review


Customers Who Viewed This Product Also Viewed



Sign up to our newsletter


Connect with us: Facebook