The SupaBrake modulator is designed to enhance the reaction time of the vehicle behind you. It will pulsate your vehicle’s brake light(s) with a variable number of flashes calculated by its embedded algorithm. The algorithm is based on the rate at which you apply your brakes. As a result, the brake light(s) are flashed in a more subtle manner at lower speeds (when brakes are frequently used), and more aggressively at higher speeds (when brakes are not used for longer time intervals). This results in the immediate attention of following drivers without annoying them.
- Simple easy Plug & Ride Installation using OEM connector
No cutting. No splicing. No crimping. No soldering. Kit comes already with factory connectors. - Smart Algorithm
Algorithm based flash routine with variable modulation and offset is implemented to ease the flashing of your brake light(s) when in heavy stop & go traffic. The product will not continuously flash your brake light(s) as seen on cheaper products that does nothing but annoy the person behind. - User profile select
10 or 108,801 field selectable/programmable profiles! - Fully Compatible with all CANBUS vehicles using any 3 or 2 wire format
- Self-contained profile selection. No need for external hardware/software etc.
- On-The-Fly profile review. Allows rider to see the internal algorithm settings
- Selectable Grace Period between brake applications
The flasher won’t activate if brakes are applied within a certain period - Input de-bounce
This feature allows the user to quickly “tap” the brake lever or pedal without the algorithm inducing its flash routine or resetting. In an event of a “tap”, the brake light will function normally and will appear as an ordinary tap of the brakes. Another aspect to this feature is that it allows the user to initiate a quick speed check on the rear brakes before a full application of the front brakes. - Force-Flash retriggering
This technology, unique to Vizible Technologies, allows the rider to manually induce a flash routine after the initial application of the brakes. This is useful when stopped alone at a red light or in traffic to alert vehicles approaching from behind. Example: Press and hold the brakes for >3seconds. Quickly release and reapply the brakes within half second. The unit will output a burst of flashes. - Decaying flash routine
Each pulse period is gradually increase from the previous pulse. This gives the burst cycle a “de-acceleration” perception when viewed from behind at speed. In other words, the routine will modulate the tail light rapidly at first then gradually slow down to become steady. - Defeat Mode
This feature allows the rider to quickly bypass all the features of the SupaBrake without having to physically remove the unit. The functionality of the brake light is easily revert to stock condition. - Miniature size. Powerful micro-controller with “watch-dog” technology
- Works with all OEM light devices (incandescent, LED or halogen)
- Algorithm with custom flash routine programming available
- Legal in all 50 States. (The running light never modulates. Only the brake light)
- High temperature tolerance
- Vibration and shock tested
- Solid construction with surface mount electronics epoxied (IEC 529 IP 6.7 standards)
- Opto-Isolated from vehicle’s electrical systems
- Low supply (quiescent) current and High load current
- De-bounce feature
Ability to tap brakes without resetting the algorithm - Decaying flash routine
- 10 Year limited warranty!
The product is 100% encapsulated in epoxy for the ultimate protection against grease, dirt and water. Potted in a CNC case that is constructed out of Delrin(R) makes it virtually indestructible.
Other modules on the market will continue to flash your brake light(s) with the same irritating routine even when you are completely stopped in traffic. This is not only illegal and annoying it hijacks and conditions other drivers/riders attention. Some of these “zombie-like” flashers claim to have an accelerometer device that will supposedly give you a couple of hundreds milliseconds reaction time. We have experimented with these devices in our lab and done many road tests. They simply don’t work due to the inherit nature of engine vibration, road vibration and mounting angle. These vectored noise components resulted in very poor response and lacked the sensitivity need. This is the reason why we don’t make nor sell them. The accelerometers used in these lesser products do not work for this application. They were designed for hand held devices – not motorcycles!
nello caltabiano (verified owner) –
I am extremely happy with this company, I’ve purchased many brake light units over time and recommended to friends Bernard is a great guy he went out of his way to make sure everything was just perfect I highly recommend this company and its products …..highly recommended…..thank you!!!!!
Dennis P. (verified owner) –
Very enjoyable transaction with Vizi-Tec on the purchase of the Suprabrake Light Modulator III. Bernard made the process very straightforward and expedient. The SB III arrived just today and installation was very simple, looking forward to exploring the various options this device has to offer. Highly recommend Vizi-Tec for their light modulator hardware and service!
Chris (verified owner) –
I finally got around to installing this today, IT WORKS GREAT!! The plug and play harness was easy and I love how it flashes alot when you have not applied the brakes in a while versus it does not flash when you’re on them constantly in stop and go traffic. Highly recommend!
David L. (verified owner) –
After a lot of research and then a couple of questions to Bernard, I ordered my Supabreak. It was the right choice. A perfect plug and play for my 2020 K1600GT. It took about 20 minutes to install.
Michael Y. (verified owner) –
I’ve bought several of the SupaBrake modules for different motorcycles over the years. The products and customer service are excellent.